how to flash mobile partner last version on Huawei e303h

In this mode, the modem has its own local IP-address (usually 192.168.8.1), visible from the side of the computer as the default gateway (default route), as well as the external IP-address is obtained from the cellular network. All the care of establishing and maintaining a connection channel modem takes over the computer does not even notice that internet access is via sototvuyu network. The computer receives from the interface network settings via DHCP, and then goes through the Internet, either through a wired LAN. With firmware HILINK modem operates in the router mode, and appears to the computer as a network interface (usb-ethernet-rndis). It is possible to prohibit the transformation of songs.

Under linux, switching is done by the usb-modeswitch program. Under windows, this is done by carrier software available on a virtual CD, or by the huawei proprietary program Mobile Partner.

In order for modem ports to appear, you need to switch the composition. The initial USB stick stick composition is a virtual CD-ROM and microSD card reader. In this case, the computer receives the IP-address directly from the mobile service provider via a DHCP request, and the modem operates as a network bridge passing packets from the computer to the cellular network and vice versa, without changing their way. The main feature of the stick-mode - to connect and channel support work is carried out by means of a computer operating system that is connected to the modem.

In this modem emulates network interface, through which data is transmitted, and through AT-port are only control commands. In this case, the speed is limited - no more than 20-30 Mbit per reception. That's how work almost all 3G-modems previous generations. With this insertion device behaves like the classic USB-modem: AT-command has a port through which a connection can be via PPP-protocol (RAS).

How to flash mobile partner last version on Huawei e303h